Gold Round Cylindrical Glass Jewelry Display Table Curved Door LED

Round Form

The display body is a cylinder rather than a rectangle. A continuous curved glass panel forms the viewing wall between a brushed gold top ring and bottom ring, so the case presents the same profile from every direction. The round footprint occupies less corner space than a rectangular case of equal deck area and has no front-side distinction, which allows customers to approach from any side. The case stands on three slender tapered metal legs fixed to the bottom ring. Related upright and plinth formats are shown in our display pedestal stands and museum pedestal cases.

Opening Access

Staff reach the interior through a curved glass door. The opening sequence is as follows:

• 1. Unlock the latch set into the bottom ring
• 2. Swing the curved door panel outward on its hinge
• 3. Place or remove items on the round deck
• 4. Close the panel and re-engage the lock

Rotating and alternative access designs are listed under rotating display cases.

Specification

Rectangular counter formats are compared in our glass display counters, and lit units under LED lighted cases.

Deck Layout

The circular deck is laid out in concentric positions rather than rows. A single bust or featured piece is placed at the center, and supporting pieces such as ring holders and earring stands are set around it on an inner ring, leaving an outer margin clear against the glass. Keep the total prop count low so every item remains visible from all sides, and orient busts to face outward if the case is approached from more than one direction. The padded deck lifts out for recovering in another fabric or cleaning, and the LED color temperature can be specified to match the deck material. Adjustable glides under the three legs level the case on uneven floors, and the curved glass door is gasket-sealed to keep dust off the merchandise.

Benson Display manufactures custom jewelry display tables, glass jewelry counters, metal jewelry counter showcases and store display systems. Round cases, rectangular counters, tower tables and consoles are produced in the same factory to keep metal finish, glass type and LED color consistent. Send the required diameter, height and deck color to receive a custom specification and quotation.